corporation.png
Generic Featured Banners_Acme Ball Nut-1.png

Drive system components (motors, handwheels)

Download our PDF for more information on these applications. 

Motors 

Duff norton motors.jpgMotors can be directly mounted to most Duff-Norton actuators using C-face adapters, directly mounted via speed reducers, or remotely mounted with shafting and couplings. IEC, servo, hydraulic, and air motors can also be supplied upon request. Please download the "Drive System Components" PDF above for more information.

 

Motor flanges - screw & nut system

motor flanges and screw nut system.jpgDuff-Norton provides complete close coupled Motor to Screw & Nut systems to Limit Switch systems for all application needs. These systems use our End Blocks and Motor Flanges to mount the respective drive and control components into one package. Common system components are; Motor Flanges (Servo, IEC, NEMA frame motors), Servo, IEC, or NEMA motors (brake, non-brake, closely mounted to Duff-Norton Motor Flanges), Ring Kit Encoders (optional, mounted between Duff-Norton NEMA Motor Flanges and NEMA motors), Couplings (needed to connect the screw's journal to the motor shaft - will be included in the motor flange kits), Acme or Ball Screw and Nut (with special length screw journal ends), Limit Switches and Potentiometers (optional), Control panels (custom designed for each application). Please download the "Drive System Components" PDF above for more information.

Flanges

flanges.jpgOur motor flanges can be purchased as a kit along with our End Blocks and Limit Switches to form a complete drive system. Motor flange kits include: 
- Motor flange 
- All required mounting hardware 
- Couplings will be specified and should be provided with the Motor Flange kit 
Please download the "Drive System Components" PDF above for more information and performance charts.

Gearmotor / screw & nut systems

gearmotor - screw and nut.jpgDuff-Norton provides complete close coupled Gearmotor / Screw & Nut systems / Limit Switch systems for all application needs. These systems use our End Blocks and Motor Adapters to mount the respective drive and control components into one package. Please download the "Drive System Components" PDF above for more information and performance charts.

 

Hand wheels

hand wheels and rotary counters.jpgHand Wheels and Rotary Counters can be mounted together on the same screw end to provide the user with instant positioning data. This combination can be used on one or both screw ends. The Duff-Norton hand wheel is for customers who may require precise positioning, or may have loads which do not require motorized power to adjust.

Let’s stay in touch!
Subscribe to our newsletter.

Guide to choosing the right linear actuator
Productivity tools and tricks for engineers VC square
New Call-to-action